SAAB WIS ONLINE

Dipped beam halogen bulb

Dipped beam halogen bulb

To remove


1. Turn the ignition key to the LOCK position.

2. LH: Remove the battery cover, air inlet pipe (A), washer fluid filler pipe (B) and the main fuse box (C).


3. Remove the bulb:


• Remove the protective cover (A) by turning anticlockwise.

• Remove the bulb by turning it anticlockwise (B). Then lift the bulb straight out of the headlamp.

• Detach the lamp connector (C).


To fit

Important

When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged.



1. Fit the bulb:


• Attach the lamp connector (C).

• Fit the bulb by turning it clockwise (B).

• Fit the protective cover (A) by turning it clockwise.

2. LH: Fit the main fuse box (C), washer fluid filler pipe (B), air inlet pipe (A) and battery cover.


3. Clear any diagnostic trouble codes.