SAAB WIS ONLINE

Front direction indicators

Front direction indicators

To remove


1. Open the bonnet.

2. Remove the bulb:

LH: Remove the washer fluid filler pipe (A).


RH: Remove the protective cover of the xenon/halogen lamp.

Turn the bulb socket (B) anticlockwise and lift out the socket.


Not US/CA: Remove the bulb from the socket by turning it anticlockwise.

US/CA: Remove the bulb (C) from the socket by carefully prying aside the lock lugs on the short sides of the fitting.



To fit

Important

When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged.



1. Fit the bulb:

US/CA: Fit the bulb into the socket by pressing it into the fitting. Make sure that the lock lugs engage.

Not US/CA: Fit the bulb in the socket by turning it clockwise.

Fit the bulb socket to the headlamp by turning it clockwise.

LH: Fit the washer fluid filler pipe.

RH: Fit the protective cover of the xenon/halogen lamp.

2. Close the bonnet.