Inner seal in differential clutch, replacement
|
|
Inner seal in differential clutch, replacement
|
|
2.
|
Position the clutch on a bench.
|
|
3.
|
Fit a 13 mm open-end wrench (A) to the clutch housing as illustrated.
|
|
4.
|
Dislodge the stuffing box (B) using a flat screwdriver (C). Take care with the surface of the clutch housing.
|
|
5.
|
Remove the open-end wrench (A).
|
|
1.
|
Press the stuffing box (A) into the clutch housing by using the special tools, 8791352 and 8390114. Use a hydraulic press. Apply the oil intended for the clutch housing in order to lubricate the stuffing box, see
Fluid type and capacity
.
|
|
2.
|
The stuffing box must be in uniform contact with the shaft (B).
|
