Limited slip differential clutch
Limited slip differential clutch |
|
To remove |
1. |
Remove
complete unit, differential clutch and limited slip differential
.
|
2. |
Remove the hydraulic pipes (A) fit tool
DT-49132
(B). Turn the tool (C) slightly and pull the pipe out from the quick-release coupling.
|
3. |
Remove the electrical connection, limited slip differential clutch.
|
4. |
Remove the bolts (A) to the limited slip differential clutch.
|
5. |
Carefully remove the limited slip differential clutch unit.
|
To fit |
1. |
Fit the limited slip differential clutch unit with a new seal. Tighten the bolts (A).
Tightening torque: 30 Nm (22 lbf ft) |
2. |
Fit the electrical connection, limited slip differential clutch.
|
3. |
Fit the hydraulic pipes (A) to the quick-release couplings and check that the pipes are fitted firmly.
|
4. |
Fit
complete unit, differential clutch and limited slip differential
.
|