Rear rubber bushings in rear axle, replacement
|
Rear rubber bushings in rear axle, replacement
|
2.
|
Remove the rear subframe.
|
3.
|
Grind two recesses in the subframe 15 mm wide as illustrated.
|
4.
|
Clean the bushing's hole from paint and dirt before pressing out the bushing.
|
6.
|
Align the tools and press out the rubber bushing.
|
7.
|
Remove the second rubber bushing in accordance with steps 3, 4, 5 and 6.
|
1.
|
Grind away any residue from the old bushing with emery cloth.
|
2.
|
Fit the rubber bushing (A) in the housing as illustrated and press the bushing into the housing with tool
CH-49158-3
(B) and tool
CH-49158-4
(C) together with the hydraulic tool. Align the tools and bushing accurately before pressing in the bushing.
|
3.
|
Apply anti-corrosion treatment to the ground away areas.
|
4.
|
Fit the second rubber bushing in accordance with steps 1 and 2.
|
5.
|
Fit the rear subframe.
|