Changing the transmission fluid
|
Changing the transmission fluid
|
1.
|
Place the car on a lift. Make sure it is as level as possible. Engage P and apply the handbrake. If using a ramp, chock the wheels. Connect an exhaust extractor.
Warning
|
The oil can be very hot if the car was recently driven. Risk of burn injuries.
|
|
|
|
|
|
2.
|
Remove the lower engine cover and place a receptacle under the car. Drain the transmission fluid through the drain plug. Remove the dipstick tube's plug first to allow access with an Allen key.
|
3.
|
Fit the drain plug and a new seal. Fit the level plug. Use protective gloves.
Tightening torque, drain plug 45 Nm (33 lbf ft)
|
6.
|
Fit the lower engine cover.
|
7.
|
Lower the car and fit the filler plug.
Tightening torque, filler plug 40 Nm (30 lbf ft)
|
8.
|
Disconnect Tech2 and the exhaust extractor.
|