Centring tool, engine and subframe, 4WD
Centring tool, engine and subframe, 4WD |
Fitting, removal/fitting tool, subframe |
1. |
Fit the tool on the trolley lift as illustrated. Pay attention to the positioning of the column and the locating pins.
|
2. |
Position the tool under the car's subframe as illustrated.
|
To fit, centring tool, engine - subframe |
1. |
Fit parts of
KM 6313 Centring fixture, subframe - engine
together with
KM 6313-200
(A).
|
2. |
Remove the rear support and fit
KM-6313-300 Support
(B).
|
3. |
B207:
Fit
89 96 878 Fitting tool, centre bush, front subframe
(C) on
KM 6313-200
.
|
Adjusting (after subframe is fitted to body) |
2. |
Tighten the bolts to the prescribed torque.
|