SAAB WIS ONLINE

Chassis reinforcement, front subframe, CV, A19DTH/DTR, A20NFT/LHU

Chassis reinforcement, front subframe, CV, A19DTH/DTR, A20NFT/LHU

To remove


1. Raise the car.

2. Remove the bolts holding the front chassis reinforcement and remove the reinforcement.

Important

The front bolts (of the rear mounting) are shorter than the others.




To fit


1. Position the chassis reinforcement and fit the bolts.

Important

The front bolts (of the rear mounting) are shorter than the others.


Tightening torque 50 Nm (37 lbf ft)


2. Lower the car to the floor.