Anti-roll bar, 4WD

/ 9-3 (9440) / 2012 / 7. Suspension, wheels / Rear suspension / Adjustment/replacement / Anti-roll bar, 4WD

To remove

1.	Raise the car.

2.	Remove the bolts (A) for the anti-roll bar (B).

3.	Remove the bolts (C) for the anti-roll bar.

4.	Lift down the anti-roll bar.

To fit

1.	Lift up the anti-roll bar. Tightening torque 30 Nm (23 lbf ft )

2.	Fit the bolts (A) for the anti-roll bar (B).

3.	Fit the bolts (C) for the anti-roll bar. Tightening torque 30 Nm (23 lbf ft )

4.	Lower the car to the floor.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.