Force sensor, front passenger seat belt (643)
| Force sensor, front passenger seat belt (643) |
| Main task |
The belt force sensor provides the PPS control module with information on the tension of the belt.
| Type |
Pressure sensor of Hall type.
| Connect |
The pressure sensor (643) is supplied with 5 volts on pin 1 from control module (591) pin 16 and grounded on pin 2 via control module (591) pin 14. The signal from the force sensor pin 3 is connected to pin 4 on the control module (591).
Wiring diagram, power supply
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
