SAAB WIS ONLINE

Rear, outer wheel housing, 5D

Rear, outer wheel housing, 5D

To remove


1. Remove Part of side plate, 5D .

2. Drill out the plug welds on the C-pillar reinforcement panel and the wheel housing.


3. Cut the outer wheel housing as illustrated. Lift away the reinforcement.

4. Cut the outer wheel housing as illustrated.


5. Lift away the wheel housing.


To fit


1. Cut the spare part as illustrated.


2. Drill holes for plug welding.

3. Apply welding primer to the surfaces to be spot and plug welded.

4. Put in place the spare part and weld on the wheel housing.


5. Plug and spot weld the new reinforcement between the wheel housing and the C-pillar.


6. Grind the welds.

7. Wash away surplus welding primer. Welding primer reduces the adhesion of paint, filler and sealant.

8. Seal joints and seams with sealant.

9. Fit Part of side plate, 5D .

10. Apply anti-corrosion agent after painting.