Rear roof member, 4D
| Rear roof member, 4D |
| To remove |
| 1. |
Remove the roof
.
|
|
| 2. |
Drill out the spot welds.
|
|
| 3. |
Tap out the rear roof member.
|
|
| To fit |
| 1. |
Grind all surfaces that are to be welded.
|
|
| 2. |
Apply welding primer to the surfaces that are to be welded.
|
|
| 3. |
Secure with some clamps.
|
|
| 4. |
Weld the part in place.
|
|
| 5. |
Fit the
roof.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
