SAAB WIS ONLINE

Washer fluid reservoir, mounting lug

Washer fluid reservoir, mounting lug


1. If the lug is loose:


Secure it with a clamp and cut a V-joint.

2. If the lug is off:

Cut a V-joint.

3. Identify the type of plastic. See Plastic codes, temperature and welding wire or Plastic code table .

4. Select the correct welding wire and set the welding gun to an operating temperature appropriate for the plastic type. See Plastic codes, temperature and welding wire .

5. Weld the lug in place.


6. Cut a V-joint on the other side.


7. Follow around with the welding wire and continue welding on the other side.


8. Warm the ends of the welding wire and pinch them together to avoid fracture indication.

9. Cut the welding wire at the ends.


10. Grind the weld as necessary.