Door seal, rear edge, CV

/ 9-3 (9440) / 2012 / 8. Body / Doors and locks / Adjustment/replacement / Door seal, rear edge, CV

To remove

1.	Open the door.

2.	Remove the rear section of the door seal with clips.

3.	Pull out the lower section of the seal from the seam.

To fit

1.	Place the rear section of the seal in fitting position and fit with clips.

2.	Fit and fasten the lower section of the seal starting from the rear.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.