Front door's upper rubber strip
|
Front door's upper rubber strip
|
1.
|
Open the window about 5 cm.
|
2.
|
Remove the door trim and fold down the moisture barrier.
|
3.
|
Remove the cover from the window frame cover and the window frame cover.
|
4.
|
Remove the door mirror.
|
5.
|
Remove the outer weatherstrip.
|
6.
|
Remove the side window.
|
7.
|
Pull out the rubber clips from the front edge of the strip.
|
8.
|
Pull off the strip from the window frame's front edge.
|
9.
|
Pull out the strip from the front glass channel.
|
10.
|
Loosen the strip a little from the window frame to loosen the strip the top edge of glass channel.
|
11.
|
Continue to pull off the strip from the window frame.
|
12.
|
Lift out the strip from the rear glass channel and pull out the strip.
|
13.
|
Pull it off from the corner.
|
1.
|
Loosen the rear cover's screws a little.
|
2.
|
Start by fitting the strip on the rear corner of the door.
|
3.
|
Insert the strip between the cover and door. Make sure the strip's flange hooks around the door's plate flange.
|
4.
|
Now place the strip on the front of the door and pull the strip from the inside of the door so that the strip's flange hooks around the plate seam.
|
5.
|
Tighten the screws in the rear window frame cover.
|
6.
|
Push down the strip in the rear glass channel by using the removal tool.
|
7.
|
Make sure the strip lies behind the plate seam.
|
8.
|
Pull the strip forwards so that the strip fits against the upper front glass channel.
|
9.
|
Press in the front strip against the door's side strip.
|
10.
|
Press in the rubber clip.
|
11.
|
Fit the remaining part of the upper strip around the window frame.
|
12.
|
Push down the strip in the front glass channel. If necessary use a long screwdriver to push it into the right position.
|
13.
|
Fit the side window. Make sure that the side window is placed in the rubber-covered bracket and that the rubber bracket is located correctly. (Image taken from outside)
|
14.
|
Tighten the window bolts.
|
15.
|
Test winding the window up and down a few times to check the function of the window.
|
16.
|
Check the fit of the strip.
|
17.
|
Fit the weatherstrip.
|
18.
|
Fit the door mirror
|
19.
|
Fit the cover into the window frame cover and the window frame cover.
|
20.
|
Fit the moisture barrier and door trim.
|