Lock cylinder
Lock cylinder |
To remove |
1. |
The window should be closed.
|
2. |
Remove the
Front door trim, 4D
and fold down the water barrier.
|
3. |
Cars with guard
: Remove the guard's screws.
|
4. |
Detach the lock cover to the handle rod.
|
5. |
Loosen the handle's rod from the clip.
|
6. |
Cars with guard
: Remove the bolts on the lock unit.
|
7. |
Cars with guard
: Remove the guard by coaxing it out.
|
8. |
Fit the upper rear nut to the handle and lock cylinder.
|
9. |
Turn the lock cylinder anticlockwise and pull out the cylinder from the handle.
|
10. |
Unhook the lock cylinder from the lock rod.
|
To fit |
1. |
Hook the lock cylinder on the rod.
|
2. |
Fit the lock cylinder by pushing the lock cylinder and turning it clockwise.
|
3. |
Fit the upper rear nut on the handle and lock cylinder.
|
5. |
Cars with guard
: Insert the lock unit bolts and the guard bolt.
|
6. |
Cars with guard
: Tighten the bolts.
|
7. |
Fit the rod in the clip. Close the lock cover to the clip.
|
8. |
Check the function of the lock, lock cylinder and the outer handle.
|
9. |
Fit the water barrier and
door trim
.
|
10. |
Cars with pinch protection:
Perform
Programming of the pinch protection
.
|