SAAB WIS ONLINE

A-pillar trim, CV

A-pillar trim, CV

To remove


1. Remove the windscreen frame upper trim .

2. Carefully pull the A-pillar trim in the top and bottom edge.


3. Cars with microphone: Disconnect the connector from the microphone.


To fit


1. Cars with microphone: Connect the connector to the microphone.

Fit the lower section of the trim in the holes in the dashboard.

Note

Make sure that the fasteners are not damaged.



2. Make sure that the rubber moulding covers the trim.

3. Press the trim securely to the A-pillar.

4. Check that the rubber moulding is in place.

5. Fit the windscreen frame upper trim .