Rear side trim, CV
Rear side trim, CV |
To remove |
1. |
Remove the rear seat back rest and seat cushion
.
|
2. |
Remove the speaker grille. Use
82 93 474 Removal tool
.
|
3. |
Remove the rear side trim screws.
|
4. |
Lift up the side trim. Retain the rubber protectors.
|
5. |
Remove the loudspeaker cables.
|
6. |
Unplug the door module connector.
|
To fit |
Note | ||
Check that the water barriers are intact. Damaged water barriers must be replaced. |
1. |
Plug in the door module.
|
2. |
Connect the loudspeaker cable.
|
3. |
Hook the side trim into the guide and press down. Check that the rubber protectors are in place.
|
4. |
Fit the screws fastening the side trim.
|
5. |
Fold the inside lip of the door opening seal over the front edge of the side trim.
|
6. |
Lift the mounting on the soft top cover seal over the side trim.
|
7. |
Fit the loudspeaker grille.
|
8. |
Fit the rear seat seat cushion and back rest
.
|
9. |
Cars with pinch protection:
Carry out pinch protection programming
.
|