Window frame cover, front, 4D, 5D
|
|
Window frame cover, front, 4D, 5D
|
|
1.
|
Open the front door window completely.
|
|
3.
|
Remove the housing in the window frame cover.
|
|
4.
|
Remove the switch connector by pressing with a small screwdriver until the clip comes loose.
|
|
5.
|
Remove the clip holding the front edge of the window frame cover.
|
|
6.
|
Remove the window frame cover by carefully pulling out the front edge of the window frame cover first.
|
|
7.
|
Then pull back the front of the window frame cover slightly so that the window frame cover comes loose from the upper part of the door frame.
|
|
8.
|
Once the upper part of the window frame cover has been removed from the door frame, pull forward the window frame cover so it comes loose from the corner of the door frame.
|
|
9.
|
Finally, move up the window frame cover so it comes loose from the rear edge of the door frame.
|
|
1.
|
Fit the window frame cover by carefully fastening it to the rear lower part of the door frame. Then press the window frame cover onto the rear edge of the door frame rail.
|
|
2.
|
Carefully fit the window frame cover to the upper corners of the door frame. Make sure the rubber moulding is positioned correctly.
|
|
3.
|
Fit the front part of the window frame cover. Make sure the cover is lying correctly against the weatherstrip.
|
|
4.
|
Fit the clips fastening the window frame cover at the front.
|
|
5.
|
Plug in the switch connector.
|
|
6.
|
Fit the housing to the window frame cover.
|
|
8.
|
Close the front door window.
|
