Backrest upholstery, front seat
Backrest upholstery, front seat |
|
|
Removing |
1. |
Remove the
seat
.
|
2. |
Remove the
head restraint
.
|
3. |
Remove the head restraint guides by opening up the catch inside each guide with a screwdriver at the same time as pulling the guide up.
|
4. |
Remove the lumbar support wheel.
|
5. |
Lie the seat down with the underside easily accessible.
|
6. |
Release the upholstery strip along the edges of the back of the backrest frame.
|
7. |
Remove the back of the backrest by pressing the back plate towards the top of the backrest at the same time as guiding the plate out from the backrest.
|
8. |
Unhook the lower edge of the backrest upholstery.
|
9. |
Unplug the backrest heating pad.
|
10. |
Loosen the lower edge and sides of the foam in the backrest.
|
11. |
Stand the seat upright.
|
12. |
Lift off the upholstery.
|
Fitting |
1. |
Guide the upholstery over the backrest frame. Make sure that the foam is correctly positioned over the side airbag.
|
2. |
Lie the seat down with the underside easily accessible.
|
3. |
Fit the lower edge and sides of the backrest foam.
|
4. |
Plug in the backrest heating pad.
|
5. |
Fit the lower edge of the backrest upholstery.
|
6. |
Fit the back of the backrest.
|
7. |
Fit the upholstery strips along the edges of the back of the backrest frame.
|
8. |
Stand the seat upright.
|
9. |
Fit the lumbar support wheel.
|
10. |
Fit the guides for the head restraint. Make sure that the catch inside the guide engages correctly.
|
11. |
Fit the
head restraint
.
|
12. |
Fit the
seat
.
|