SAAB WIS ONLINE

Rear drainage hose, sunroof 4D

Rear drainage hose, sunroof 4D

Note

Pay attention to cleanliness so that the headlining does not become dirty.


To remove


1. Remove the headlining, see Headlining, 4D . Headlining, 4D, US/CA .

2. Remove the inspection cover.

• Right-hand side:

• Remove the clip (A) and fold down the inspection cover.


• Remove the clip (B) that holds the wiring harness to the rear lamp


• Remove the insulation, 2 clips (C).

• Left-hand side:

• Open the inspection cover.


• Remove the amplifier unit for the radio. See Amplifier .

• Remove the insulation. 3 clips (A)


3. Remove the rear drainage hose.

• Remove the hose (A) from the sunroof assembly.


• Remove the hose from the clips, right-hand side (A)


• Remove the hose from the clips, left-hand side (A)


• Remove the hose from the sound trap (B) behind the wheel housing in the luggage compartment.


• Pull the hose out from the cabin.


To fit


1. Fitting the rear drainage hose.

• Route a new hose through the hole down to the sound trap at the wheel housing.

• Secure the hose to the sound trap (B) behind the wheel housing in the luggage compartment.


• Secure the hose in the clips, right-hand side (A).


• Secure the hose in the clips, left-hand side (A).


• Secure the hose (A) for the sunroof assembly.


2. Fit the inspection cover.

• Right-hand side:

• Refit the insulation. 2 clips (A)


• Fit the clip (B) that holds the wiring harness to the rear lamp.

• Fold up the inspection cover and fit the clip (A).


• Left-hand side:

• Refit the insulation. 3 clips (A).


• Fit the amplifier unit for the radio. See Amplifier .

• Fold back the inspection cover.


3. Fit the headlining, see Headlining, 4D . Headlining, 4D, US/CA .