E39 / P0010 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Malfunction Indicator Lamp

P0010 00

Fault symptom

Malfunction Indicator Lamp

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Battery voltage must be between 10 - 18 V.

Engine running.

Output active.

Fault criteria:

The solenoid's requested position does not correspond with its actual position.

OK report:

Fault criteria NOT fulfilled.

Fault handling:

Type III

(See section Fault handling III, "Other emission-related components and functions" for more information.)

Checking the wiring harness

Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:

Electrical fault in connecting leads or component.

Functions in the diagnostic tool related to the fault:

Test value:

•	Intake Cam Angle Solenoid Bank 1

Activation:

•	Intake Cam Angle Solenoid Bank 1

(See also description of readings/activations in diagnostic tool)