SAAB WIS ONLINE

E39 / P0106 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE Cruise control not working. Limp home

  P0106 00


Manifold Absolute Pressure Sensor Circuit. Performance Problem.

Fault symptom

CHECK ENGINE

Cruise control not working.

Limp home

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

General conditions for this DTC
•Battery voltage must be between 11 - 16 V.
Test 1
•Engine running.
•The following diagnostic trouble codes may not be generated:
P0096, P0097, P0098
P0102, P0103
P0107, P0108
P0111, P0112, P0113, P0114
P0335, P0336
P0116, P0117, P0118, P0119 P0128
P0236, P0237, P0238
P2227, P2228, P2229, P2230
Test 2
•Ignition ON.
•The following diagnostic trouble codes may not be generated:
P0107, P0108
P0236, P0237, P0238
P2227, P2228, P2229, P2230

Fault criteria:

Test 1
Absolute pressure sensor value differs more than 15 kPa from atmospheric pressure sensor and charge air absolute pressure sensor.
Test 2
Absolute pressure sensor value is below 50 kPa.
Or
Absolute pressure sensor value exceeds 105 kPa.

Dependent:

None

System reaction to a fault:

Cruise control blocked.

Fault handling:

Type III
(See section Fault handling III, "Other emission-related components and functions" for more information.)

Diagnostic help

Diagnosis regards:

Electrical fault in the component.
A leak anywhere in intake system and vacuum system can generate the DTC.
The signal is compared with the other pressure sensors when the ignition is on and the engine not started. The value must be close to the other values.

Functions in the diagnostic tool related to the fault:

Test value:
•Charge Air Absolute Pressure
•Manifold Absolute Pressure
•Atmospheric Pressure
(See also description of readings/activations in diagnostic tool)