E39 / P0341 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Malfunction Indicator Lamp

P0341 00

Fault symptom

Malfunction Indicator Lamp

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

•

Test 1

Starter motor cranking.

The following diagnostic trouble codes may not be generated:

P0335, P0336

P0641, P0651

•

Test 2

Engine running.

The following diagnostic trouble codes may not be generated:

P0335, P0336

P0641, P0651

Fault criteria:

•

Test 1

Signal corresponds to more than 8 pulses/less than 4 pulses from the sensor when the crankshaft has turned 2 revolutions.

•

Test 2

Signal corresponds to more than 3216 pulses/less than 3184 pulses from the sensor when the crankshaft has turned 500 revolutions.

Fault handling:

Type III

(See section Fault handling III, "Other emission-related components and functions" for more information.)

Checking the wiring harness

Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:

Electrical fault in connecting leads or component.

Functions in the diagnostic tool related to the fault:

Test value:

•	Intake Cam Angle Bank 1

Deviation from Requested Exhaust Cam Angle Bank 1

Engine Speed (RPM)

(See also description of readings/activations in diagnostic tool)