E39 / P1632 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: The car will not start.

P1632 00

Fault symptom

The car will not start.

On-board diagnosis

Type of diagnosis:

Once per driving cycle.

Enable criteria:

Ignition ON.

Fault criteria:

CIM or I Bus ECU's Not Added

Dependent:

None

System reaction to a fault:

Starter motor cannot be started.

OK report:

Fault criteria NOT fulfilled.

Diagnostic help

Diagnosis regards:

See which DTC are stored in the other systems and read their diagnostics information.

See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general.

Functions in the diagnostic tool related to the fault:

See menu "All - Add/Remove"