SCM / P1516 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: None
Battery Current Sensor, Invalid Signal, Bus from BCM
Fault symptom
None
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| Invalid signal from battery current sensor for over 60 seconds. |
System reaction to a fault:
| The SCM stops regulating the charging. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
| Electrical fault in connecting leads or component. |
