SAAB WIS ONLINE

Delivery service

Delivery service

Materials needed for delivery service are found in the car's glove compartment and luggage compartment.


1. Unlock the car.

2. Remove Paintwork protective film Paintwork protective film.

3. Remove Transport supports from the suspension.

4. Remove Transport protection, brake rotors (certain markets).

5. Perform Battery, check . Check that the battery's terminal clamps are well fastened. Charge the battery 60 days after production date.

Important

If possible, the battery should be checked before the car is started in order to prevent misleading results due to "top charging". If the car has already been started, wait 20 minutes before connecting the battery analyser.


6. Install the battery cover.

7. Check tire pressures and check that the repair spray can and tool kit are complete.

8. Check the level and top up the following fluids:

- Washer fluid

- Engine Oil

- Coolant

- Brake Fluid

- Power steering fluid

9. Remove protection from, among others, the following places in the passenger compartment:

- Seats

- The steering wheel

- Floor, driver side

- Sills front

- Navigation unit's display

10. Lay extra carpets in place (optional equipment)

11. Remove the VIN-tag from the side window on the rear door (if applicable).

12. Get out included parts from the glove compartment, luggage compartment, and passenger compartment.

13. Deactivate the car's transport mode (if there is one), See Transport mode, deactivating

14. Check the rearview mirrors' function.

15. Check the seatbelts' function.

16. Perform settings according to the car's user's manual of date, time, Multi-info display (MID), Triple-info display (TID). Set the radio and infotainment as well as language.

17. Check the function of the washer and wiper system.

18. Check the front seats' electric heating and check mechanical function of manual and electrically operated seats.

19. Erase fault codes in all systems.

20. Program electric power windows, see Window motor, programming and setting .

21. Install the number plate according to instructions. Install Number plate, front .

22. Remove the towing eye, close the cover, remove the spare wheel (if included) and place the towing eye in the tool compartment. Install the spare wheel.

23. Check-tighten the wheel nuts. Tightening torque: 150 Nm

24. Check all locks: engine hood, doors (door closing, child safety lock), rear seat backrest , tank cap, tailgate.

25. Visual check of parking brake (unloaded wheels), brake lines and brake hoses, fuel lines, muffler, exhaust system, front wheel suspension, rear wheel suspension, tie rods, drag links, units' sealing.

26. Road test the vehicle. See Test-driving

27. Check that no new fault codes have been detected in any system.

28. Clean the car.