Automatic Transmission Flex Plate Installation

/ 9-4x / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Automatic Transmission Flex Plate Installation

Special Tools

•	EN 46106 Flywheel Holding Tool

•	EN 45059 Torque Angle Sensor Kit

For equivalent regional tools, refer to Special Tools .

1.	Install the automatic transmission flex plate (2).

2.	Loosely install the NEW 8 automatic transmission flex plate bolts (1).

3.	Install the EN 46106 holder.

4.	Tighten the 8 automatic transmission flex plate bolts (1) to 30 Nm (22 lb ft) .

5.	Tighten the NEW 8 automatic transmission flex plate bolts an additional 45 degrees using the EN 45059 kit.

6.	Remove the EN 46106 holder .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.