Camshaft Position Actuator Replacement - Bank 2 (Left Side) Intake (LAU)
Camshaft Position Actuator Replacement - Bank 2 (Left Side) Intake (LAU) |
Removal Procedure |
1. |
Remove the left exhaust camshaft actuator. Refer to
Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust (LAU)
.
|
2. |
Remove the intake camshaft position actuator bolt.
|
3. |
Remove the left intake camshaft position actuator.
|
Installation Procedure |
1. |
Ensure the proper camshaft position actuator is installed. Observe the body of the camshaft position actuator for the IN marking (3).
The marking is for an intake camshaft position actuator. |
3. |
On the left intake camshaft actuator the edge of the reluctor wheel (1) lines up with the peak (2) of the sprocket tooth.
|
4. |
Ensure the proper timing mark is used. Observe the outer ring of the camshaft position actuator for the circle marking (1).
The circle marking is for alignment to the highlighted timing chain link on the left side of the engine. |
5. |
Refer to
Torque Reaction Against Timing Drive Chain Caution
.
Use an open wrench on the hex cast into the camshaft in order to prevent camshaft rotation when tightening the camshaft position actuator bolt. |
6. |
Locate the intake camshaft position actuator to the camshaft and loosely install the bolt.
|
7. |
Refer to
Torque Reaction Against Timing Drive Chain Caution
.
Tighten the camshaft position actuator bolt. Refer to Camshaft Position Actuator Installation - Left Side Intake . |
8. |
Install the left exhaust camshaft actuator. Refer to
Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust (LAU)
.
|