Crankshaft Rear Oil Seal and Housing Removal

/ 9-4x / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Crankshaft Rear Oil Seal and Housing Removal

1.	Remove the crankshaft rear oil seal housing bolts.

2.	Use the pry points located at the edge of the crankshaft rear oil seal housing to separate the RTV sealant.

3.	Remove and discard the crankshaft rear oil seal housing.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.