Engine Coolant Thermostat Housing Installation (LF1, LFW or LFX)

/ 9-4x / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Engine Coolant Thermostat Housing Installation (LF1, LFW or LFX)

1.	Install a NEW gasket onto the thermostat housing.

2.	Install the thermostat housing.

3.	Refer to Fastener Caution Install the thermostat housing bolts. Ensure to install the short bolts (1) and the long bolt (2) in the proper position and tighten to 10 Nm (89 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.