Exhaust Manifold Cleaning and Inspection - Right Side
Exhaust Manifold Cleaning and Inspection - Right Side |
Cleaning Procedure |
1. |
Clean the exhaust manifold in solvent.
|
2. |
Dry the exhaust manifold with compressed air. |
Inspection Procedure |
1. |
Inspect the right exhaust manifold for the following:
|
• |
Damage or excessive corrosion to the exhaust manifold exterior (3)
|
• |
Damage to the exhaust manifold mounting holes (2)
|
• |
Damage to the threaded holes (4)
|
• |
Damage to the exhaust manifold flange bolt holes (1)
|
2. |
Inspect the right exhaust manifold for the following:
|
• |
Damage to the gasket sealing surfaces (1)
|
• |
Damage or restrictions within the exhaust passages (2)
|
3. |
Repair or replace the right exhaust manifold and/or components as necessary.
|
4. |
Measure the alignment or surface flatness of the exhaust manifold flanges, using a straight edge and a feeler gauge. Exhaust manifold surface flatness must not exceed 0.254 mm (0.010 in).
|
5. |
If the surface flatness is not within specifications, the exhaust manifold is warped and must be replaced.
|