Fuel Rail Installation (LAU or LBW)

/ 9-4x / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Fuel Rail Installation (LAU or LBW)

1.	Install the fuel injector rail (2).

2.	Refer to Fastener Caution . Install the fuel injector rail three bolts (1) and tighten to 10 Nm (89 lb in) .

3.	Install the fuel injector wiring harness (2).

4.	Install the 6 fuel injector wiring harness plugs (1).

5.	Push down on the fuel injector electrical connector retainer (1), securing the electrical connector. Repeat for all 6 injectors.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.