Oil Level Indicator and Tube Installation (LF1, LFW or LFX)

/ 9-4x / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Oil Level Indicator and Tube Installation (LF1, LFW or LFX)

1.	Install a NEW O-ring on the oil level indicator tube.

2.	Install the oil level indicator and tube (2) by sliding the tube down through the lower crankcase hole.

3.	Refer to Fastener Caution . Install the oil level indicator tube bracket bolt (1) and tighten to 10 Nm (89 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.