Oil Pan Assemble

/ 9-4x / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Oil Pan Assemble

1.	Refer to Fastener Caution . Install the oil pan drain plug (1) and NEW O-ring seal (2) and tighten to 25 Nm (18 lb ft) .

2.	Install the NEW oil suction pipe O-ring (1).

3.	Install the oil suction pipe (2).

4.	Install the oil inlet pipe's bolts (1) and tighten to 10 Nm (89 lb in) .

5.	Install the oil pan scraper (2).

6.	Install the oil pan scraper bolts (1) and tighten to 10 Nm (89 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.