Turbocharger Coolant Feed Pipe Installation
| Turbocharger Coolant Feed Pipe Installation |
| 1. |
Install the turbocharger coolant feed pipe (5).
|
|
| 2. |
Refer to
Fastener Caution
.
Install the turbo charger coolant feed pipe fitting (3) and (4) and tighten the M14 banjo screw to 35 Nm (26 lb ft) . |
|
| 3. |
Install the turbocharger's coolant feed pipe fitting (1) and (2) and tighten the M12 banjo screw to
30 Nm (22 lb ft)
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
