Turbocharger Oil Feed Pipe Installation

/ 9-4x / 2011 / 2. Engine / Basic engine, V6 / Adjustment/replacement / Turbocharger Oil Feed Pipe Installation

1.	Install the turbocharger oil feed pipe (4).

2.	Install the turbocharger oil feed pipe bolt (3).

3.	Refer to Fastener Caution . Install the 2 turbocharger oil feed pipe fitting (1, 2) and tighten the banjo screw to 30 Nm (22 lb ft) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.