SAAB WIS ONLINE

Turbocharger Oil Return Pipe Replacement

Turbocharger Oil Return Pipe Replacement



Callout Component Name

Preliminary Procedures

1. Remove the charge air cooler Inlet duct . Refer to Charge Air Cooler Inlet Duct Replacement .

2. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Left Side (LAU) .

3. Remove the radiator outlet pipe. Refer to Radiator Outlet Pipe Replacement (LAU) .

4. Remove the turbocharger oil feed pipe. Refer to Turbocharger Oil Feed Pipe Replacement .

5. Remove the turbocharger coolant feed pipe. Refer to Turbocharger Coolant Feed Pipe Replacement (LAU) .


1 Turbocharger Oil Return Pipe Fastener (Qty: 2) Refer to Fastener Caution .

Procedure

Ensure to install a NEW turbocharger oil return pipe gasket whenever is the pipe is removed.

Tighten

14 Nm (11 lb ft)
2 Turbocharger Oil Return Pipe Fastener

Procedure

Ensure to Install a NEW turbocharger oil return pipe seal whenever is the pipe is removed.

Tighten

65 Nm (48 lb ft)
3 Turbocharger Oil Return Pipe

Procedure

Transfer parts as necessary.