Valve Lifter Installation - Right Side
|
Valve Lifter Installation - Right Side
|
1.
|
Note
|
Do not stroke/cycle the stationary hydraulic lash adjuster plunger without oil in the lower pressure chamber.
|
Note
|
Do not allow the stationary hydraulic lash adjuster to tip over, plunger down, after the oil fill.
|
Fill the stationary hydraulic lash adjuster (SHLA) with clean engine oil. Refer to
Adhesives, Fluids, Lubricants, and Sealers
for recommended engine oil. Take precautions to prevent scratching the pivot sphere area (1) of the SHLA.
|
3.
|
Install the SHLAs in the cylinder head.
|