SAAB WIS ONLINE

Water Pump Installation

Water Pump Installation


Special Tools

EN 46104 Water Pump Pulley Holding Tool

For equivalent regional tools, refer to Special Tools .


1. Ensure that the engine front cover and water pump are clear of old gasket material.


2. Make sure that the water pump's bolt holes in the engine's front cover are clean and dry.

3. Place a new water pump gasket on the water pump.

4. Place the water pump in position on the front cover.

5. Fit the bolts and tighten with your fingers.


6. Refer to Fastener Caution .

Tighten the water pump bolts in sequence to 12 Nm (106lb in) .

7. Retighten the water pump bolts in sequence to 12 Nm (106lb in) .

8. Install the water pump pulley.


9. Loosely install the water pump pulley bolts.

10. Install the EN 46104 tool (1) onto the water pump pulley and tighten the water pump pulley bolts to 10 Nm (89 lb in) .

.