Radiator Outlet Hose Replacement (LF1)

/ 9-4x / 2011 / 2. Engine / Cooling system / Adjustment/replacement / Radiator Outlet Hose Replacement (LF1)

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, refer to Special Tools

Removal Procedure

1.	Drain the cooling system. Refer to Cooling System, Draining and Filling (GE 47716) Cooling System, Draining and Filling (Static Fill LAU) Cooling System, Draining and Filling (Static Fill LF1) .

2.	Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

3.	Remove the radiator air lower deflector. Refer to Radiator Air Lower Deflector Replacement .

4.	Disengage tension on the radiator outlet hose clamp (1) at the radiator using BO-38185 Hose Clamp Pliers.

5.	Remove the radiator outlet hose (2) from the radiator.

6.	Disengage tension on the radiator outlet hose clamp (1) at the engine using BO-38185 Hose Clamp Pliers.

7.	Remove the radiator outlet hose (2) from the engine.

8.	Remove the radiator outlet hose from the vehicle.

Installation Procedure

1.	Install radiator outlet hose to the vehicle.

2.	Note Lubricate the inside diameters of the hose with clean coolant prior to installation. Install the radiator outlet hose (2) to the engine.

3.	Engage tension on the radiator outlet hose clamp (1) at the engine using BO-38185 Hose Clamp Pliers.

4.	Install the radiator outlet hose (2) to the radiator.

5.	Engage tension on the radiator outlet hose clamp (1) at the radiator using BO-38185 Hose Clamp Pliers.

6.	Install the radiator air lower deflector. Refer to Radiator Air Lower Deflector Replacement .

7.	Lower the vehicle.

8.	Fill the cooling system. Refer to Cooling System, Draining and Filling (GE 47716) Cooling System, Draining and Filling (Static Fill LAU) Cooling System, Draining and Filling (Static Fill LF1) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.