SAAB WIS ONLINE

Crankshaft Position Sensor Replacement

Crankshaft Position Sensor Replacement



Callout Component Name

Preliminary Procedures

1. If equipped with AWD, remove the right side catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LF1) .

2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .


1 Bolt Refer to Fastener Caution .

Tighten

9 N m (80 lb in)
2 Bolt

Tighten

58 Nm (42 lb ft)
3 Exhaust Manifold Lower Heat Shield
4 Bolt

Tighten

10 Nm (89 lb in)
5 Crankshaft Position Sensor

Procedure

1. Disconnect the crankshaft position sensor harness connector.