SAAB WIS ONLINE

Fuel feed pipe, replacement (engine)

Fuel feed pipe, replacement (engine)



Callout Component Name

Preliminary Procedures

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief

2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement

3. Remove the fuel pipe shield. Refer to Fuel Pipe Shield Replacement .


1 Fitting (Qty: 1) Refer to Fastener Caution .

Tighten

28 Nm (20 lb ft)
2 Bolt (Qty: 2)

Tighten

50 Nm (28 lb ft)
3 Fuel Feed Pipe

Procedure

1. Discard the pipe when removed and install a new pipe.

2. Ensure that the high pressure fuel pipe, and fuel pump fittings are clean and dry prior to assembly.

3. Pressure up the fuel system and check for leaks.