Heated Oxygen Sensor Replacement - Sensor 1 (LAU)
Heated Oxygen Sensor Replacement - Sensor 1 (LAU) |
Callout | Component Name |
Preliminary ProceduresRemove the intake manifold cover. Refer to Intake Manifold Cover Replacement . |
|
1 |
Catalytic Converter Front Heat Shield Fastener (Qty: 4)
Refer to
Fastener Caution
.
Tighten8 Nm (71 lb in) |
2 | Catalytic Converter Front Heat Shield |
3 |
Heated Oxygen Sensor
ProcedureDisconnect the electrical connector.Tighten42 Nm (31 lb ft) |