Heated Oxygen Sensor Replacement - Sensor 2 (LAU)
| Heated Oxygen Sensor Replacement - Sensor 2 (LAU) |
| Callout | Component Name |
Preliminary ProceduresRemove the intake manifold cover. Refer to Intake Manifold Cover Replacement . |
|
| 1 |
Heated Oxygen Sensor
Refer to
Fastener Caution
.
ProcedureDisconnect the electrical connector.Tighten42 Nm (31 lb ft) |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
