SAAB WIS ONLINE

Intermediate pipe, fuel supply, replacement (LF1 or LFW)

Intermediate pipe, fuel supply, replacement (LF1 or LFW)



Callout Component Name

Preliminary Procedures

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .

2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .

3. Remove the fuel pipe shield. Refer to Fuel Pipe Shield Replacement .


1 Fitting (Qty: 3) Refer to Fastener Caution .

Tighten

• Tighten the fittings in sequence as numbered: 1, 2, 3

• First Pass 15 Nm (11 lb ft)

• Second Pass 30 Nm (22 lb ft)


2 Fuel Feed Intermediate Pipe

Procedure

1. Discard the pipe when removed and install a NEW pipe.

2. Lubricate the pipes with silicon free engine oil. Refer to Adhesives, Fluids, Lubricants, and Sealers .

3. Pressure up the fuel system and check for leaks.