SAAB WIS ONLINE

Knock Sensor Replacement - Bank 1

Knock Sensor Replacement - Bank 1



Callout Component Name

Preliminary Procedures

1. If equipped with AWD, remove the right side catalytic converter. Refer to Catalytic Converter Replacement - Right Side (LF1) .

2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .


1 Bolt Refer to Fastener Caution .

Tighten

25 Nm (18 lb ft)
2 Bolt

Tighten

58 Nm (42 lb ft)
3 Exhaust Manifold Lower Heat Shield
4 Bolt

Tighten

23 Nm (17 lb ft)
5 Knock Sensor

Procedure

Disconnect the electrical connector.