Secondary Air Injection Pipe Replacement
Secondary Air Injection Pipe Replacement |
Removal Procedure |
1. |
Remove the three-way catalytic converter. Refer to
Three-Way Catalytic Converter Replacement (Service)
.
|
2. |
Remove the secondary air injection pump pipe. Refer to
Secondary Air Injection Pump Pipe Replacement
.
|
3. |
Remove the check valve pipe fasteners (1) and (2).
|
4. |
Remove the check valve bracket fasteners (1) and(2).
|
5. |
Remove the check valve (1) and gasket (2).
|
Installation Procedure |
1. |
Install the check valve (1) and gasket (2).
|
2. |
Refer to
Fastener Caution
.
Install the check valve bracket fastener (1) and tighten to 9 Nm (80 lb in). |
3. |
Install the check valve bracket fastener (2) and tighten to
58 Nm (43 lb ft).
|
4. |
Install the check valve pipe fasteners (1) and (2).
|
5. |
Tighten the check valve pipe fastener (1) to
23 Nm (17 lb ft)
.
|
6. |
Tighten the check valve pipe fastener (2) to
9 Nm (80 lb in).
|
7. |
Install the three-way catalytic converter. Refer to
Three-Way Catalytic Converter Replacement (Service)
.
|
8. |
Install the secondary air injection pump pipe. Refer to
Secondary Air Injection Pump Pipe Replacement
.
|