SAAB WIS ONLINE

Throttle Body Assembly Replacement (LAU)

Throttle Body Assembly Replacement (LAU)



Callout Component Name

Preliminary Procedures

Remove the charge air cooler outlet duct and support bracket. Refer to Charge Air Cooler Outlet Duct Replacement .
1 Throttle Body Fastener (Qty: 4) Refer to Fastener Caution .

Tighten

10 Nm (89 lb in)
2 Throttle Body

Procedure

1. Disconnect the electrical connector.

2. Install a NEW throttle body seal.

3. Perform the throttle learn procedure. Refer to Throttle/Idle Learn (LF1, LFW) Throttle/Idle Learn (Without LF1, LFW) .