SAAB WIS ONLINE

Exhaust Turbocharger Inlet Pipe Replacement - Bank 1 (LAU)

Exhaust Turbocharger Inlet Pipe Replacement - Bank 1 (LAU)



Callout Component Name

Preliminary Procedures

1. Remove the catalytic converter heat shield. Refer to Catalytic Converter Heat Shield Replacement (LAU) .

2. Remove the catalytic converter. Refer to Catalytic Converter Replacement (LAU) .

3. Remove the right exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement - Right Side (LAU) .

4. Remove the transmission heat shield. Refer to Transmission Heat Shield Replacement (LAU) .


1 Exhaust Turbocharger Inlet Pipe Bolt (Qty: 2) Refer to Hot Exhaust System Warning . Refer to Fastener Caution .

Tighten

30 Nm (22 lb ft)
2 Exhaust Turbocharger Inlet Pipe Bolt (Qty: 3)

Tighten

20 Nm (17 lb ft)
3 Seal
Note

Replace the exhaust turbocharger inlet pipe seal.


4 Exhaust Turbocharger Inlet Pipe